EnigmA Amiga Run 1997 July/EnigmA AMIGA RUN 20 (1997)(G.R. Edizioni)(IT)[!][issue 1997-07 & 08][EAR-CD IV].iso/lightwave/lwmlist/95.lightwave-10/000776_owner-lightwav…mail.webcom.com_Fri Oct 13 14:28:50 1995.msg

Internet Message Format | 1995-11-07 | 2KB

Received: by mail.webcom.com
    (1.37.109.15/16.2) id AA238979730; Fri, 13 Oct 1995 14:28:50 -0700
Return-Path: <[e-mail]>
Received: from emout06.mail.aol.com by mail.webcom.com with ESMTP
    (1.37.109.15/16.2) id AA238919709; Fri, 13 Oct 1995 14:28:29 -0700
Received: by emout06.mail.aol.com (8.6.12/8.6.12) id RAA08999; Fri, 13 Oct 1995 17:21:08 -0400
Date: Fri, 13 Oct 1995 17:21:08 -0400
From: [e-mail]
Message-Id: <[e-mail]>
To: [e-mail]
Cc: [e-mail]
Subject: Re: PAR-TBCIV/svhs input
Sender: [e-mail]
Precedence: bulk

In a message dated 95-10-13 15:20:59 EDT, you write:

>> My question is this:  is there anything in the PAR or TBCIV software
>> which needs to be done besides selecting SVHS in TBCIV preferences?
>> I have no problem grabbing off the composite output, but I get nothing
>> off the svhs.  I suspect a problem with the TBCIV or s/w because I can
>> (E/E) monitor the composite output even when svhs is selected in TBCIV
>> preferences.  Any ideas?

Some video equipment will disable their outputs/inputs if there are 2 cables
attached. If you're going out SVHS on your playback deck or camera,
disconnect the composite cable. Also, on your TBC4, Check the tool types on
your TBC 4 software icon. Make sure your baud rate is set to 31250. Then
check dip switch #2 on your board. Make sure it is set to on which is the
baud rate setting for 31250. If the switch is off your baud rate  is set to
9600 and the software won't be able to talk to the board and you won't be
able to control it through software.

Tom Rennen
Intelligent Light Digital Imaging
214-420-6815
--
[e-mail] sent this message.
To Post a Message           : [e-mail]
Un/Subscription Requests To : [e-mail]
(DIGEST)                 or : [e-mail]
Administrative Items To     : [e-mail]